Lowering control arms combined with 2 inch lowering coil springs drop the front 5 inches. Control arms come assembled with ball joints, mounting shafts, and urethane bushings.

The rear is a simple flip kit where you move the axle from beneath the leaf spring to on top of the leaf spring. No “C-section” is required on your C-10 because the frame leaves plenty of suspension trave even after its lowered with the 5 inch flip kit.

Note: If your original rear axle u-bolts need replacing our kit, DJM2456-5/5LTD , is this same but includes new U-bolts and leaf     spring spring plates for the flip kit.