{"product_id":"2012-18-jk-rubicon-2dr-4in-kit-bds1418fs-1","title":"2012-18 JK Rubicon 2Dr 4In. Kit - BDS1418Fs","description":"\u003cp\u003e\u003cspan\u003eBDS1418FS will take your 2012-2018 Jeep Wrangler JK 2 Door to the next level and improve the ride with this 4-inch lift kit from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires. Up front the lift kit includes 4\" Pro-Ride coil springs capable of full coil bind and 3\" bump stop extensions to control the compression travel but increase wheel travel. Also included are brake line brackets sway bar links and front track bar relocation bracket and pitman arm to improve the steering and handling geometry. The front suspension in this 4-inch lift kit is finished off with fixed length lower control arms with OE grade rubber bushings that re-position the front axle for proper alignment. In the rear the kit utilizes Pro-Ride coil springs sway bar drop brackets and a rear frame mounted track bar relocation bracket to correct axle shift. For proper rear axle position and pinion angle this kit includes fixed length rear lower control arms and adjustable rear upper arms. Round out this 4\" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePro-Ride Coil Springs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSteering Correction\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTo optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures-\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTapered and roll-pointed leafs add flexibility and provide an even deflection rate\u003c\/li\u003e\n\u003cli\u003eIncreased wheel travel and a softer ride from tapering allow smoother transition between leafs as compression takes place\u003c\/li\u003e\n\u003cli\u003eHigher articulation from bolt-style leaf alignment clamps prevents leafs from fanning out allowing leafs to twist and flex\u003c\/li\u003e\n\u003cli\u003eMulti-leaf progressive design for smooth ride\u003c\/li\u003e\n\u003cli\u003eAnti-friction pads provide a smooth and quiet ride\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDetails-\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Height: 4 IN\u003c\/li\u003e\n\u003cli\u003eFront Lift Method: Coil Springs\u003c\/li\u003e\n\u003cli\u003eInstallation Difficulty: moderatelyEasy\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 8 Hrs\u003c\/li\u003e\n\u003cli\u003eInstallation Tools: Basic Hand Tools-Torque Wrench-dieGrinder-drill-jack hydraulic-puller pitmanArm\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 4 IN\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Coil Springs\u003c\/li\u003e\n\u003cli\u003eShocks Included: Yes\u003c\/li\u003e\n\u003cli\u003eSway Bar Link Option: Fixed Links\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNotes-\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2wd models.\u003c\/li\u003e\n\u003cli\u003eThe fixed front and rear lower control arms can be upgraded to the flex or adjustable arms listed in the accessories.\u003c\/li\u003e\n\u003cli\u003eThe front driveshaft is maxed out at full droop and on certain models the driveshaft boot can contact the transmission pan. Replacement of the front driveshaft is recommended.\u003c\/li\u003e\n\u003cli\u003eExhaust modification may be required.\u003c\/li\u003e\n\u003cli\u003eThis kit is FMVSS No.126 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NLsuelo Suspensions","offers":[{"title":"Default Title","offer_id":45067574444066,"sku":"BDS1418FS","price":2122.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/6052\/8930\/files\/bds_jeep_1405FS_1406FS_1417FS_1418FS__11407_2.jpg?v=1773473124","url":"https:\/\/nlsuelosuspensions.com\/products\/2012-18-jk-rubicon-2dr-4in-kit-bds1418fs-1","provider":"NLsuelo Suspensions ","version":"1.0","type":"link"}